Netis Switch PoE 16 x 10/100M port + 2 Gigabit Uplink Ports 1xSFP port P116GH

Interface

16 10/100M POE Ports (Data /Power)

2 10/100/1000M RJ45 Ports (Data)

1 SFP Slot(Data)

Store & Forwarding

Yes

LED

PWR – Lighting:The product is powered on

Function indication – Lighting:The function switch is on and watch dog+ Extend Mode is enabled

Port lights – Lighting:Port link is normal,Blinking: Data in transit

Mode

Normal Mode

Extend+Watch Dog Mode

Switching Capacity

9.2G

MAC Address Table Size

2K

Jumbo Frame

2048 byte

Power Input POE Standards

Single port maximum power 30W,

Whole switch maximum power 240W

Support over-current, over-voltage and short-circuit protection

Support Soft Start of High Power PD

Support sequential boot-up

Power Supply Pin:12+/36-

AC 100~240V 50-60HZ

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3af/at, Power over Ethernet

IEEE 802.3x Flow Control

Mode

Normal switch mode

Watch dog + Extend mode

Basic function

Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Support POE IEEE 802. 3af/at compliant Powered Device (PD)

Store-and-forward switching scheme

Support IEEE802.3X full duplex and Backpressure half duplex

MAC address auto-learning & auto-aging

Data Transfer Rate

10Mbps(Half-duplex and Full-duplex)

100Mbps(Half-duplex and Full-duplex)

1000Mbps(Full-duplex)

Environment

Operation Temperature：0℃～40℃

Storage Temperature：-40℃～70℃

Operation Humidity：10%～90% RH Non-condensing

Storage Humidity：5%～90% RH Non-condensing

Cabling type

1000BASE-T : Cat5e or better UTP(≤100m)

100Base-TX: Cat 5e or better UTP/STP(≤100m)

10Base-TX: Cat 5e or better UTP/STP(≤250m)

Dimensions

270*180*45mm(L * W* H )