Netis Switch PoE 4 x 10/100M port + 2 Uplink Ports 10/100 ST106PDI

Power Indicator

Lights up when the device is powered on.

Function Indicator

Lights up when the extended transmission function is enabled.

Switch Ports

Normal mode/Cable Extension mode

Ports

4x100Mbps POE ports + 2x100Mbps uplink ports

Backplane Bandwidth

1.2Gbps

MAC Address Table

2K

Input Power

100-240V~ 50/60Hz

Power Supply

65W 54V/1.2A

Maximum POE Output Power

55W

Network Media & Transmission Distance

• 100Base-TX: 2 pairs of Category 5 (Cat5) or higher UTP/STP cables (≤100m)
• 10Base-TX: 2 pairs of Category 6 (Cat6) or higher UTP/STP cables (≤250m)

Basic Functions

• Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards
• Compatible with IEEE 802.3af/at compliant powered devices (PD)
• Compatible with certified non-standard powered devices (PD)
• Supports store-and-forward switching
• Supports automatic MAC address learning and aging
• Extended cable transmission,supports long-distance monitoring power supply
• Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control

Ethernet Protocols and Standards

• IEEE 802.3 Ethernet Media Access Control (MAC) protocol
• IEEE 802.3i 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3af Power over Ethernet (POE)
• IEEE 802.3at High Power over Ethernet (POE)
• IEEE 802.3x Flow Control

Data Transfer Rates

10/100Mbps support for both full-duplex and half-duplex modes

Temperature

• Operating Temperature:0℃ ~ 40℃
• Storage Temperature:-40℃ ~ 70℃

Humidity

• Operating Humidity:10% ~ 90% RH(non-condensing)
• Storage Humidity:5% ~ 90% RH(non-condensing)

Altitude

• Operating: Max 6500 feet (2000 meters)
• Storage: Max 6500 feet (2000 meters)

Differential Mode

4KV

Common Mode

4KV

Dimensions

(W x D x H)

190mmx140mmx43mm

Protective Packing

EPE protection

Stacking Limit

Maximum of 4 layers when fully packaged

Humidity

5%～90% RH(non-condensing)

Storage Temperature

-40℃ ~ 70℃,with the most suitable storage condition being room temperature considering humidity

Storage Precautions

Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration

Storage Period

Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use